|
| |
| Residential Pool 2-Bend Standard Handrail |
 Return to product screen
|
View Full Image |
|
|
| Description: |
Swimming Pool 2-Bend Standard Handrail: Stainless Steel 48" to 72" Spread (One Only)
▪ Outside Diameter: 1.90"
▪ Wall Thickness: .049".
▪ Stainless Steel tube with mirror finish.
(One Only)
▪ Click for Printable Brochure |
| Notes: |
 This is a single, 2 Bend Swimming Pool Handrail of a standard height and length which runs generally parallel with an angle typical of pool steps. With proper anchor devices pool handrail, it is suitable for use on stairs and slopes on poured concrete, shotcrete, fiberglass and vinyl pools, spas as well as for other applications in most geographic areas. In addition and with the proper anchor sockets and a secure mounting, this pool handrail unit can be surface-mounted for light to moderate duty.
Standard Features: The 2-Bend Standard Length Pool Handrail is of polished, 1.9" (48.26mm) Outer Diameter (OD), 304 stainless steel with a wall thickness of .049" (1.25mm). Escutcheons and anchors for use with these pool handrails are ordered separately.
2HR4049 - 48" Spread Stair Rail (one only)
2HR5049 - 60" Spread Stair Rail (one only)
2HR6049 - 72" Spread Stair Rail (one only).
Features and Benefits:
▪ Highest Quality Stainless Steel for durability
▪ State-of-the-art bending technology to ensure consistently beautiful rails throughout any aquatic facility
▪ Custom Rails are our specialty—we customize any rail to fit your facility needs. Get the custom rails you need and get them fast!
 General Notes:
The 2-Bend Swimming Pool Handrail is a standard height rail made of polished type 304 stainless steel. The handrail is designed to run generally parallel with an angle typical of pool steps. An extended front leg model is also available.
Application:
With proper anchoring, the 2-Bend Pool Handrail is suitable for use on stairs and slopes on poured concrete, shotcrete, fiberglass, and vinyl pools and spas as well as for other applications in most geographic areas.
Specifications:
1. Handrail: The pool handrail is made of 1.90” O.D. x .049" (48.3mm x 1.65) type 304 polished stainless steel and all bends are a nominal 6” (152.4mm) radius. Both ends of the pool handrail are drilled below deck level to allow for anchoring by reinforcing rods, if an anchor assembly is not desired. The Extended Length Front Leg model utilizes an additional 12” (304.8mm) to address varying site and local requirements. The extended pool handrails can be cut to appropriate length on site.
2. Escutcheon (Optional): (p/n IEP-100): This recommended oblong escutcheon plate is 4” (101.6mm) in length and is made of chrome plated cast brass. The escutcheon includes a tamper resistant, stainless steel set screw. Alternative escutcheons include p/n EP-100A or EP-100F.
3. Anchor Assembly (Optional) (p/n IAS-100, see spec sheet for SRS-913): These recommended anchor sockets are bronze castings. They are intended for heavy-duty use and secure fixtures by means of a wedge assembly. The anchor comes with a brass 1/4-20 UNC grounding screw for bonding. Alternative anchor assemblies include p/n AS-100B (see spec sheet for SRS-908). 2-Bend Swimming Pool Handrail
NOTE: Escutcheons sold separately w/ss products; included with powder coated ladders and rails.
All measurements on center:
|
| |
| Shipping: Free Shipping |
|
|
|
|
|
Specials | Pool Guide | Pool Sites | Return Request
Fax 1-800-591-6709
)