The DE filter is loaded with too much debris or algae and needs backwashing or regeneration. If this problem persists and you notice the filter gauge pressure risingt from 7 - 10 psi above your beginning pressure, you need to regenerate your filter.
Refer to your Owner's Guide for further instructions or consult your pool dealer for service.
Your pump output might exceed the design flow rate of the filter. Make sure the pump is correctly sized for your filter.
If there is algae in the pool, super chlorinate, backwash or bump/drain and recharge as needed. Make sure you are properly backwashing on your vertical grid filter.
Refer to your Owner's Manuals for instructions.
▪ See Replacement Grids
S.Merillat® |
Specials | Pool Guide | Pool Sites | Return Request
Fax 1-800-591-6709
